Spray the height-adjustment springs and pivot bolts with a silicone-based lubricant twice a year.

: To permanently lock the sections together, lift the combined pole assembly vertically and strike the bottom end firmly against a thick piece of scrap wood or heavy cardboard 5 to 6 times. Flip the pole over and strike the opposite end against the wood. This structural friction-fit creates a stable, wiggle-free foundation.

Lay the pole assembly flat on the ground. Connect the opposing ends of the extension arms to the top pole section.

Periodically tip the base slightly or look inside to ensure water has not evaporated or leaked out. Top it off whenever necessary.

Insert the wheel axle through the designated slots in the plastic base. Slide the wheels onto the axle and secure them according to the manual's diagram.

when the bolts align perfectly—a sound of pure victory. By the time they snapped the Slam-It rim