Kes Geyser Load Control Timer Manual New -

There are many benefits to using a Kes Geyser Load Control Timer, including:

The timer cannot run its schedule accurately if its internal clock is wrong. To set the master clock: kes geyser load control timer manual new

| Error Display | Meaning | Solution | |---------------|---------|----------| | | Internal memory failure | Press RST with a pin. If persists, replace timer. | | E2 | Battery low (below 2.5V) | Replace internal rechargeable battery (CR2032 or soldered type). | | E3 | Load limit exceeded repeatedly | Reduce other appliances (stove, dryer) or increase load limit setting. | | - - : - - on clock | No time set | Long press SET and reprogram time. | | Flashes “Ld” but grid is stable | Faulty ripple signal or wiring | Call electrician to test R1/R2 terminals. | | Geyser not heating in MAN mode | Tripped internal relay | Check output terminal voltage with multimeter. | There are many benefits to using a Kes

If there is no space in the DB, mount the unit in a suitable enclosure in a ceiling cavity or near the geyser. 2. Wiring Diagram Summary | | E2 | Battery low (below 2